Syringes and needles: which one, and why

Two kinds of syringe and the needles that go with them: fixed-needle U-100 insulin syringes for injecting small amounts, where 100 units is 1 mL and 31G is the usual needle on the 0.3 and 0.5 mL barrels, and luer-lock syringes marked in millilitres for mixing and moving liquid, with blunt drawing needles and pen needles alongside. The two are easy to confuse: an insulin syringe's needle is built in, so almost nothing is left behind in the hub, while a luer tip is a screw thread that takes a blunt drawing needle, a filter or a vial adapter.

Insulin syringe or luer syringe: which is which?

On an insulin syringe the barrel matters more than the needle. A 0.3 mL barrel holds 30 units and spreads them over the same length a 0.5 mL barrel uses for 50, so each line sits further apart and a small amount is easier to read. A 1 mL barrel holds 100 units but most brands mark it every second unit, because there is not room for a hundred separate lines. Half-unit versions exist, and they are a 0.3 mL feature. Gauge — the thickness — runs backwards: 31G is thinner than 30G, and the thinner needles come on the smaller barrels.

On a luer syringe the question is the connection and what you screw into it. Luer-lock has a threaded collar the needle screws into and cannot pop off under pressure, which is what you want pushing liquid through a 0.22 µm filter or into a spray bottle. Blunt fill needles are wide and deliberately dull for drawing up quickly; they are still sharps and still go through skin under force, and they are never for injecting. Pen needles belong to neither group: they screw onto a pen's own thread and are the one consumable a pen routine eats.

What differs between listings

  • Gauge is the needle's thickness. A higher number is a thinner needle: 31G is thinner than 30G.
  • Capacity is how much liquid the barrel holds. Smaller barrels have more space between the lines, so small amounts are easier to read.
  • Smallest line is what one line on the barrel is worth. Half-unit lines let you read 0.005 mL; a 1 mL syringe is usually marked in 2-unit steps.
  • Needle length is how long the needle is. 4–8 mm (5/32–5/16 in) is common for under-the-skin use, and 13 mm (1/2 in) insulin syringes are used under the skin too; muscle needles are usually 25 mm (1 in) or longer.
  • Whether a needle is included at all: luer syringes usually ship without one.
  • Needle length, which is separate from gauge: 4 to 8 mm is the usual under-the-skin range, 12.7 mm (1/2 in) is an older under-the-skin length, and needles for muscle are typically 25 mm (1 in).

Recorded specifications compared

Values come from each product's own record; a dash means the record has none for that column.

Recorded specifications compared
ProductTypeGaugeCapacityMarkingsSmallest line
Insulin Syringes 31G, 0.5 mL (100-count)Insulin syringe31G0.5 mLU-1001 unit
Insulin Syringes 31G, 0.3 mL (100-count)Insulin syringe31G0.3 mLU-1001 unit
Insulin Syringes 30G, 1 mL (100-count)Insulin syringe30G1 mLU-1002 units
Luer-Lock Syringes, 3 mLLuer syringe—3 mLmL0.1 mL
Blunt Fill Needles, 18GNeedle18G———
Pen Needles 32G (100-count)Pen needle32G———
Half-Unit Insulin Syringes, 0.3 mLInsulin syringe31G0.3 mLU-1000.5 unit
Luer Needle Tips, 27GNeedle27G———
10 mL Luer-Lock SyringesLuer syringe—10 mLmL0.2 mL

Everything in Syringes & Needles (12)

Narrow this category by specificationCompare side by side

Written comparisons

Guides for this shelf

Last edited . Equipment only: nothing on this page is advice about what to inject, how much, or whether a product is fit to use. That comes from the product's labelling and whoever supplied it. Product pages link to your own country's Amazon store through affiliate links; your price is the same.